How to use your fire extinguisher

Introduction:

A fire extinguisher is an active fire protection device used to extinguish or control small fires, often in emergency situations. It is not intended for use on an out-of-control fire, such as one which has reached the ceiling, endangers the user (i.e., no escape route, smoke, explosion hazard, etc.), or otherwise requires the expertise of a fire brigade. Typically, a fire extinguisher consists of a hand-held cylindrical pressure vessel containing an agent that can be discharged to extinguish a fire.

What Are the Different Classes of Fires?

Classes of Fire Extinguisher:

Here are the five classes of fire extinguisher. No single extinguisher can be used to tackle every fire, and because each types of fire extinguisher has different classes of fire on which it is effective, selection can be a minefield. The first step is to look at what materials are present in the area to be protected from fire. These can be divided into six categories of a fire involving different substances:

• Class A combustible carbon-based solids eg paper, wood, or textiles
• Class B, flammable liquids eg paraffin, petrol, diesel or oil (but not cooking oil)
• Class C, flammable gases, eg butane, propane or methane
• Class D, burning metals, eg aluminum, lithium or magnesium
• Fires caused by electrical equipment (indicated by an electric spark symbol and not the letter E)
• Class F, fats, and cooking oils.
•  

How to use your fire extinguisher:

Once you've made your purchases, familiarize yourself with the fire extinguisher directions so you’ll be prepared in case you need to put out a fire. Typically, fire extinguishers are fairly easy to use in the case of a fire. Most of the types operate using the P.A.S.S. technique:

• P. Pull the pin on the fire extinguisher in order to break the tamper seal.
• A. Aim the fire extinguisher low, with the nozzle pointed at the base of the fire. 
• S. Squeeze the handle of the fire extinguisher to release the extinguishing agent. 
• S. Sweep the nozzle from side to side while pointed at the base of the fire until it is extinguished. 
• If the fire re-ignites, repeat the last 3 steps.

What Are the Different Types of Fire Extinguishers?

There are five main types of fire extinguishers:

• Water.
• Powder.
• Foam.
• Carbon Dioxide (CO₂).
• Wet chemical.

 

Where to put Fire Extinguishers

It is important to know the locations and the types of extinguishers in your workplace prior to actually using one.

fire extinguishercan be heavy, so it's a good idea to practice picking up and holding an extinguisher to get an idea of the weight and feel.

Take time to read the operating instructions and warnings found on the fire extinguisher label. Not all fire extinguishers look alike.

Practice releasing the discharge hose or horn and aiming it at the base of an imagined fire. Do not pull the pin or squeeze the lever. This will break the fire extinguisherseal and cause it to lose pressure.

When it is time to use the extinguisher on a fire, just remember PASS!

Pull the pin.

Aim the nozzle or hose at the base of the fire from the recommended safe distance.

Squeeze the operating lever to discharge the fire extinguishing agent.

Starting at the recommended distance, Sweep the nozzle or hose from side to side until the fire is out. Move forward or around the fire area as the fire diminishes. Watch the area in case of re-ignition.

Fire extinguishers can explode

Of equal importance is the fact that a fire extinguisher that is badly damaged, has major dents and/or signs of a leak is potentially dangerous. It is possible for the canister to explode. If you suspect that the extinguisher is in bad shape, it is recommended that you contact a professional fire extinguisher company and request that they come and inspect it. They may suggest that you replace the old one. Better safe than sorry.

What to do after use:

Once the fire extinguisher has been used you should replace it or have it serviced and refilled as soon as possible to be properly prepared in the event of another fire. Universal Fire Protection Provides Fire Extinguisher Maintenance and Refilling services in Lahore, Karachi, Islamabad, Rawalpindi, and other cities of Pakistan. 

FIRE EXTINGUISHER PRICE IN PAKISTAN

Universal Fire Protection provides all types of CO2 fire extinguishers , DCP (Dry Chemical Powder) Fire Extinguishers , and  Foam fire extinguishers at very cheap price in Pakistan Karachi, Lahore, Islamabad and Rawalpindi.

 

It is a pretty easy way to get a Quotation for requiring a fire extinguisher. Our affordable range of fire extinguishers will never let you compromise the fire safety needs of your commercial facility in Pakistan.

Do you need solutions to promptly extinguish the spreading fire before any severe damage occurs in your workplace? Flashing Led lights, fire alarms, and proper signaling can use as the first measures.

We have different kinds of fire extinguishers and fire protection equipment to help you tackle fire emergencies and pass regulatory fire inspections at very cheap price. Be sure to order and use our fire safety products that use either chemical, inert gases, foam or water-based extinguishing agents to suppress fire more effectively. Click here to get Quotation for requiring a fire extinguisher or visit the link below.

For further details visit: https://www.universalfireprotection.com.pk/fire-extinguisher-price-in-pakistan/